Received the gearbox and some of the remaining parts.
Well got 90% of my RCR now. Just waiting on some back ordered parts and a few parts that could not ship in time (CV's Flywheel etc). The gearbox arrived in one piece and I'm very grateful to Fran for securing this transaxle for me. Also received the Ford GT starter, shifter and clutch and pressure plate.
Also finished the trolley support for the lift. The wheels are high capacity and this will allow me to move the car even when totally complete with engine transaxle etc. The car is bolted to it so it will not move while loading the transaxle etc.
Also a small video of the car on the lift (approx 12 Mb).
Update : 24th June, 2008
Car arrived today!
Well, my RCR 40 finally arrived today! Due to importation rules the Ford GT gearbox will follow with other parts in another 2 weeks. However the body etc. arrived in good condition. Thanks to RCR for dismantling and packing the parts, they are great sports.
Just threw the parts inside the garage so that I could return the truck!
My electric hydraulic vehicle lift also arrived from the USA with the car. With a 6,000 Pound (2,722 Kg) capacity it will easily lift the entire car with the engine and gearbox fitted.
Also seen below is the new RCR cross member in my chassis. This is just in front of the seat and should not cause any occupant issues. Only drawback appears to be the kinking in the floorpan from the welding when viewed underneath (mine was added at the end of the chassis build, new ones won't have this issue). It has resulted in a downward bump of approximately 5mm in one spot shown with the arrow. Looks like the spot where a lot of additional welding was done. Not a functional problem just looks a bit ordinary (like a big downward dent) when you look under the car.
Looking forward to the next delivery for the wheels, gearbox, seals, suspension, shocks, sway bars, gear shift etc.
Update : 06th June, 2008
Visited RF today in Melbourne Australia.
Go to Other Stuff or click here for more images etc.
Update : 24th May, 2008
All parts are on the way!
Getting excited now that the parts are all on a boat! I think my parts are bottom right!
Update : 7th May, 2008
Dispatch of the kit from RCR
Well the kit has finally been packed at RCR, Detroit USA and is ready for dispatch.
Update : 1st May, 2008
Visit to RCR USA
Shown below are images of the RCR workshop in the USA.
All has been progressing well. Got some good photos of my car (RCR64) in white gel coat. Chose white as color was not confirmed at the time. Also figured being covered in LOTS of white dust would be better than blue or red!
One of the real challenges was the gearbox selection. The choice of a Ricardo Ford GT Transaxle was finalised with a first time trial fitment to a similar GM engine to the one to be used in my car (6.0 lt L76). As the pictures below show, its a tight fit but it "should" be do-able! Huge thanks to Fran for facilitating this check for me.
Click the image below to download and view the AVI movie file (21Mb) of the installation check.
Update : 5th Feb, 2008